Tips for the Choosing of Ballast of the Solar Street Light

The principle of choosing the ballast is that the basic parameters should be in the regulated range of rated frequency. The frequency and voltage-current characteristic of the ballast should be paid more attention, and the following tips should also be noticed: a. The impedance stability of the solar street light The deviation of the resistance …

Road stud in America

The road stud is an exotic product, and it is an advanced traffic safety facility, which is widely applied all over the world. The road stud, which can also be called road stud, and this is always used in England or other European countries. But how the Americans call the road stud and how it …

Tips for the Installation of Road Studs.

With the wide application of road studs in the construction of urban roads of our country, the quality and service time of road studs has been paid more attention. However, in the practical application, the road studs are damaged or the using time is reduced because of abnormal installation. So it is easy to find …

NK-1001 reflective road studs

NK-1001 reflective road stud is made of high quality ABS material, and the reflection of reflective road studs can meet ASTM D4280 and EN 1463-1 standard. It has been shown to enhance safety performance and to have a more sustainable and economical method of delineation during night time or adverse weather. The NK-1001 reflective road …

A New Type of Road Stud

The safety awareness of people has increased in recent years, so an increasing number of traffic safety facilities has been applied in our daily life, which have already become the caretakers of drivers and pedestrians on the way. Yellow, red and blue are the most common colors of the reflective road studs that are used …

Solar road stud are accepted by clients all over the world

The solar road studs absorb solar energy in daytime, and the storage inside the reflectors transform solar energy into electrical energy. At night, the storage facility will transform the electrical energy into light, which is given out through the leds to delineate the road and guide the drivers. The solar road studs have lower consumption …

The Solar Road Studs in Canada

Another product made by NOKIN becomes popular in Canada, which is the solar road stud of NK-RS-D1. Our Canada client purchased 1,300 pieces of solar led cat eye road stud of NK-RS-D1. He has done a lot of experiment on this product, and NOKIN was not disappointing him that all cargo of NOKIN has past …

Common problems appear in the installation process of road studs

With the wide application of road studs in the construction of urban roads of our country, the quality and using life of road studs has been paid more attention. However, in the practical application, the road studs are damaged or the using time is reduced because of abnormal installation. 1. The road stud is not …

The Control Technology of Solar Synchronized Road Studs

The solar synchronized road studs refers to the solar road studs installed flickering in the same frequency, and work synchronized in the unity condition. In the condition of wireless, the technologies adopted to the solar synchronized road studs are mainly: closed-loop control technology, interlocking technology, and short period embedded control technology. closed-loop control technology refers …

The outside environment has great influence on the solar road studs.

The working temperature for normal batteries is between 0 to 50 degrees centigrade and the cycle index can reach 500. In summer, the land surface temperature of some countries can be around 60 degrees centigrade, and it is quite normal that the lowest temperature in Northeast China would minus 30 degrees centigrade in winter. However, …