Common problems appear in the installation process of road studs

With the wide application of road studs in the construction of urban roads of our country, the quality and using life of road studs has been paid more attention. However, in the practical application, the road studs are damaged or the using time is reduced because of abnormal installation.

1. The road stud is not installed in clean space.
The degree of soundness of road studs relies on the close connection of road stud, glue and the surface of road. If the installation space is not clean, the dust will reduce the adhesive strength of glue, which may cause the insecure of road studs. And they will fall apart when external force crashes them.

2. Too much glue or too little glue.
If the glue is not enough, the soundness of adhesion will be reduced, however, the superfluous glue will leak out around the road stud with too much glue on it, and the glue may contact with the reflectors, which may have influence on the reflecting light of them.

3. Nonuniform glue on road studs.
When install the road stud, the glue should not only be used in right quantity, but should be paint uniformly. In this way, every part of the road stud will full-stressed to avoid being broken because of nonuniformation.

4. Epoxy resin adhesive is not made in suitable temperature.
Epoxy resin adhesive is the two-component adhesive, and the glue and hardener should be mixed with a certain percentage, and it will be effective only when they are mixed evenly. However, the epoxy resin adhesive will be condensed in cold winter days, which is not easy to mix evenly, so it should be heated after it soft enough before using the epoxy resin adhesive.

solar-road-stud

The use of different colours can also enhance driver awareness of road boundaries to further increase road safety. An example of this is the use of road studs to mark the edge of the highway which can reduce the risk of accidents and reduce damage to the highway edges.

This way, we can ensure their correct installation and, if necessary, provide advice on suitable application.This method makes them indestructible and they can be driven over continuously. They can be installed in asphalt and concrete roads/elements and other types of foundations.

Our road studs installation services and cats eyes installations are available for a range of environments such as;

motorways
roads
slip roads
pedestrian crossings
car parks
parking bays
ports
airports

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s